Portable Electromagnetic Drilling Machine
- The cutter lifting tube is with tooth row design which is stronger and more durable than the old slide plate type.
- The minimum height of the machine is 232mm and it’s much lower than the old type machine which is with electric drill. This machine can be used for processing object with low space.(the minimum height of the old type machine is 450mm)
- The 19mm shank with short type twist drill bit can be used for drilling hole which is smaller than 16mm.
|Power (AC)||110V-120V 50/60 Hz|
|220V-240V 50/60 Hz|
|Motor Rated Output||110V-120V 1010W|
|Motor Rated Ampere||110V-120V 9.2A|
|No Load Speed||720min-1|
|Hole -cutting Capacity||Ø17 to 35mm|
|Drill Capacity||Ø6 to 16mm|
|Magnet Holding Power||800kgf|
|Standard Fitting|| Connecter of hole
Pilot Pin50L x1piece
Coolant tank set x1 set
Allen key 6mm x1piece
* These specifications and shape may be changed for improvement without prior notice.